davey_d's profile
Community Admin

Community Admin

 • 

2.9K Messages

Wed, Jun 15, 2022 7:49 PM

System Firmware 2.8 (June 2022)

Hi folks,

One more update is now rolling out for your SimpliSafe system. For those new to updating firmware for your Base Station, check out our Help Center Article here.

Here’s what’s coming in Update 2.8:

  • Optimizations to local communication, especially between Base Station and Keypad
  • Fixes for some issues encountered with replacement module install process
  • Laying groundwork to support upcoming features
  • Fixes an issue with Keypad reboots when Sensors are activated

Previous Updates:

Official Solution

Community Admin

 • 

2.9K Messages

Il y a 1 m

Hi all,

An update. from our engineering team. The issue reported by @jgould1981 and others, where the Keypad might spontaneously reboot when a sensor is triggered, has in fact been fixed in this update. I've added the item to the above list!

1 Message

Il y a 2 m

Does this update address the constant rebooting of the keypad when an entry sensor is triggered?  I’ve been having issues with the keypad rebooting ever since the February update…

Community Admin

 • 

2.9K Messages

@jgould1981​ That's new to me. So it might be something specific to your system that is happening.

Is it when an alarm is triggered, or just whenever, say, you open a door, and the Base Station chimes?

Of course, I would recommend installing this latest Firmware as soon as it's available on your system. That will clear out the old firmware, if that was the problem.

1 Message

Just wanted to chime in that I'm having the same problem as @jgould1981 .

My keypad will randomly reboot when a door sensor is opened - no alarm, just opened.

Not sure if this firmware update fixed it - just installed now.

(edited)

1 Message

@davey_d​ I also want to chime in that I’m having the same issue as @jgould1981

It’s not very frequent but does happen every so often. I’m not sure if the new firmware fixes it but can report back if I continue seeing the issue. 

I just wanted to say I have also noticed this about my keypad. Doesn't seem to be much of an issue but it is odd.

Community Admin

 • 

2.9K Messages

@Loving_Awareness​ have you already installed Firmware 2.8? I'm curious if this weird Keypad issue is also resolved for you after that.

9 Messages

Il y a 1 m

Davey. Where is the promised update to fix the problem with the IP cameras??? The cameras sre functionally useless from a security aspect, there have been multiple  threads and dozens  of posts about the issue.   Each time simplisafe says that a fix is being developed by the devs, now six month later a new update is released and zero help for the cam  issue.  We have been patient, but its obviously not a priority for simplisafe . Ive spent $1500 on cameras and pay each month for

premium service only to record blank or late videos that miss the action. I have given up after this release, im reinstalling my old ip cameras and dvr. 

(edited)

Community Admin

 • 

2.9K Messages

@Brianb​ sorry to hear that you've been having trouble. Our cameras have a separate firmware stream. For example, the latest Outdoor Camera firmware is 1.7, and more are on the way.

9 Messages

Davey:

Thanks for answering, but "more are on the way" doesn't help. 

I work in a related field and I would be fired in a nanosecond if I failed to address a critical issue impacting a paying customer.  I realize you personally are not one of the Software Devs, but lets address this as a customer service isssue.

1. Customer purchases equipment and signs up for a paid service that promises a certain level of fuctionality.

2. Device Hardware/firmware fails to provide the promised functionality. Since the functionlity involves safety/security this would infer that the issue should receive critical attention.

3. Months go by with no fix, Simplisafe continues to bill customer's for a service that is not being provided. 

4. The customer is pleased with the service of the "other" components, but feels that Simplisafe (excuse the pun) simply doesn't care about their own IP camera's. This places the customer in a dilemma; does he scrap the entire system and lose his investment, cancel live monitoring and live with the flawed system,  or does he continue to pour money in the toilet and pin hopes that some future firmware release will address the problem?

Davey, please think about the above, especially #4.  If you were the end consumer, what would you do?

Community Admin

 • 

2.9K Messages

I hear you, and I fully understand. I mostly wanted to clarify (especially for others coming to this thread) that the cameras have a different firmware process. The last one did bring some improvements - especially for those who were seeing a battery drain issue. But our engineers are very aware that there's still a lot of work to go. 

I am not able to provide any further info on the next firmware updates, but as soon as I can, I will share with the Community.

9 Messages

Davey, so what do we, the customers, do in the meantime? I’m not trying to be snarky, and you do seem like a good guy,  but the cameras are non functional from a security perspective, they are just expensive toys. 


I realize I’m getting redundant at this point, but I have $1500 tied up in cams, and continue to  pay for a premium service that only benefits if the cameras are working. 

I (we) need something more than ‘we are working on it ‘ with no resolution date. Will SimpliSafe buy back all my cams, solar panels,and  power extensions kits ?   At this point I need to move forward with purchasing my own NVR and IP cams. 

(edited)

9 Messages

@davey_d I'm in the exact same boat as @Brianb 

Moved into a new house, spent a bunch of money on SS system based on professional reviewers, and have spent prob 20-30 hours on phone troubleshooting every SS camera (esp doorbell and outdoor ones). Have had numerous times been told by customer support via email (btw, all of their emails arrive in my inbox as from "Dave from Simplisafe", I don't know if that's supposed to be you or not Davey_d) that my request would be "escalated" and senior tech support would get in touch, but been over 1-2 months now and no contact. Kept wondering if I should return the whole system and jump ship, but too many other renovation projects going on and just let it slide and now past return window.

Feel like we should copy/paste some emails to the professional reviewers like Wirecutter to update all their positive reviews of SS and mention that no one for whom cameras are important should get it. I don't think anyone can really in good conscience recommend SS for cameras at this point given how many threads there are echoing the same problems, and if some of these reviewers were aware and mentioned the problems in their reviews I would never have touched SS and would've gone w Ring or something else. Feels like SS just rushed these cams out to capture some market share and they're just not really reliable or trustworthy unfortunately. It's actually worse than the first Gen Ring doorbell that came out what, like 7-8+ years ago?

3 Messages

Il y a 1 m

I've  had the same problem with keypads rebooting since the November update. 

SS replaced a keypad in February. Apparently they didn't know it was a widespread bug at the time.

Glad to see I'm not the only one reporting this problem. 

Community Admin

 • 

2.9K Messages

@gdfaini​ funnily enough, I hadn't heard about it myself, until users started mentioning it in this thread.

Was the update to 2.8 able to fix it for you?

1 Message

Il y a 1 m

I have noticed several times over the last few months (since I got this system) that when I open my garage door right by the keypad I’ve seen a message saying it was reconnecting to Wi-Fi. I’m guessing that’s the rebooting others are referring to. Haven’t tried to see what else may cause it.

Community Admin

 • 

2.9K Messages

@Scottf​ that might be a different thing. You'll know that the Keypad rebooted by the SimpliSafe logo appearing for several seconds.

Have you already installed this latest firmware update?

9 Messages

Il y a 13 d

I can see that those with camera issues are being ignored, while small problems like keypad resets get priority.  My 10 camera system is completely useless, each motion triggered events results in 10 black screen recordings.  Paid over $1500 in cameras, and pay premium service monthly for a monitored camera service that fails to function.  Ive tried to resolve this with support, and also here in this form.   All we get is shoulder shrugs and being told to wait for some unknown future update.  I’ve had enough, Opening a case with BBB.