S

Fri, Jul 3, 2020 3:15 PM

VIdeo Doorbell corner kit for mounting

Anyone had to use a 90 degree corner kit to mount the video doorbell camera?  My doorbell is on a wall that is perpendicular to my front door that makes it necessary to turn the camera 90 degrees to view the approach to my door.  Simplisafe advised they only have a small wedge (it appears to be about 15 degrees) and that the wedges cannot be stacked to achieve 90 degrees.  I see that Ring makes a 90 degree corner kit but am unsure if the Simplisafe video doorbell will mount properly to this kit.

Captain

 • 

4.6K Messages

Il y a 2 y

@scouch53 Amazon sells them.

100 Messages

Il y a 2 y

The wedge they sell is also a vertical wedge meant to compensate for lap siding. It won't do squat for your situation (which is identical to my own).

I designed a 30% horizontal mount (which is plenty due to the very wide field of view) and posted the 3d model on thingiverse.  https://www.thingiverse.com/thing:3252620

If you have a 3d printer you can download that model for free and print one up. If you don't have a 3d printer, you just need to find somebody who has one and is willing to print one up for a reasonable fee. Of course, that's not allowed here......

3 Messages

Il y a 2 y

I just received the door bell. My door bell is off to the side.  You would think that SimpliSafe would have this wedge option stackable kit included. How dumb it that. I would of paid an extra $15 for it. Now I have to go find an aftermarket. Not a good move SimpliSafe.

8 Messages

Il y a 2 y

I found a 90 degree mount here: http://www.ebay.com/itm/143663453466
just in case anyone else needed one for the SimpliSafe doorbell....